Forged Wire Rope Clips

Forged Carbon Steel

Forged Wire Rope Clips
Drawings of Forged Wire Rope Clips

Specifications

  • Process:     Forged
  • Material:     Carbon Steel
  • Finish:        Galvanized
  • Origin:        Import
Part Number Rope Size A B C D E F G H Min No. Clips
for Max Strength
Min. Spacing
Between Clips
Weight Lbs.
18500* 1/8 1/2 7/8 1/2 3/4 15/16 7/32 17/32 7/16 2 3/4 0.030
18505 3/16 19/32 1 1/4 5/8 31/32 1 13/16 1/4 15/16 1/2 2 1 1/8 0.094
18510 1/4 11/16 1 1/2 5/8 1 17/32 1 3/8 5/16 1 3/16 11/16 2 1 1/2 0.176
18515 5/16 7/8 1 11/16 13/16 1 17/16 1 3/4 3/8 1 5/16 5/8 2 1 7/8 0.276
18520 3/8 1 1 15/16 7/8 1 19/16 1 15/16 7/16 1 5/8 7/8 2 2 1/4 0.442
18530 1/2 1 13/16 2 1/4 1 1/16 1 29/32 2 5/16 1/2 1 13/16 1 13/32 3 3 0.750
18540 5/8 1 1/4 1 1/2 1 1/2 2 17/32 3 9/16 2 1 1/4 3 3 3/4 0.990
18545 3/4 1 1/2 2 13/16 1 9/16 2 13/16 3 3/8 5/8 2 3/16 1 15/32 4 4 1/2 1.442
18550 7/8 1 3/4 3 3/16 13/4 3 1/8 3 13/16 3/4 2 7/16 1 1/2 4 5 1/4 2.164
18555 1 1 7/8 3 1/2 1 13/16 3 11/16 4 5/16 3/4 2 5/8 1 3/4 5 6 2.542
18570 1 1/2 2 9/16 4 3/8 2 13/16 5 1/8 5 7/8 7/8 3 3/8 2 13/32 7 9 5.046
Edward W. Daniel Diamond-D Products Logo

Malleable Wire Rope Clips

Malleable Carbon Steel

Malleable Wire Rope Clips
Drawings of Malleable Wire Rope Clips

Specifications

  • Process:    Malleable
  • Material:    Carbon Steel
  • Finish:       Zinc Plated
  • Origin:       Import
  • Specifications:  Includes Regular Hex Nuts to Federal Specification FF-C-450 Type 1, Class

Use Clips Properly For Maximum Efficiency:

  1. U-Bolt Should bear on dead end of rope
  2. Use recommended number of clips, depending on safety Requirement.
  3. Spacing between clips should be 6 times the rope diameter.
  4. Nuts should be re-tightened after Initial Load.
Part Number Rope Size Inside Length
Of U-Bolt
Min Number
of Clips for
Max. Strength
Weight Lbs.
20900 1/16 23/32 2-4 0.018
20905 1/8 23/32 2-4 0.030
20910 3/16 15/16 2-4 0.060
20915 1/4 1 1/32 2-4 0.100
20920 5/16 1 5/16 2-4 0.122
20925 3/8 1 1/2 2-4 0.212
20930 7/16 1 7/8 3-4 0.270
20935 1/2 1 7/8 3-4 0.362
20940 9/16 2 1/4 3-4 0.464
20945 5/8 2 3/8 3-4 0.476
20950 3/4 2 3/4 4-5 0.762
20955 7/8 3 1/8 4-5 1.294
20960 1 3 1/2 4-5 1.328
20965 1-1/8 3 7/8 6-8 2.514
20970 1-1/4 4 1/4 6-8 3.052
Edward W. Daniel Diamond-D Products Logo

Regular Wire Rope Thimbles

Formed Carbon Steel

Regular Wire Rope Thimbles
Drawing of Regular Wire Rope Thimbles

Specifications

  • Process:    Formed
  • Material:    Carbon Steel
  • Finish:       Galvanized
  • Origin:       Import
  • Specifications:  Meets Federal Specification FF-T-276B, Type II.  Recommended for light duty service.
Part Number Rope Size B C F L W Weight Lbs.
40400 1/8 1.410 0.705 0.300 1.920 1.100 0.024
40405 3/16 1.440 0.715 0.375 1.920 1.130 0.026
40410 1/4 1.435 0.715 0.410 1.910 1.080 0.024
40415 5/16 1.580 0.775 0.480 2.100 1.250 0.042
40420 3/8 1.750 0.960 0.570 2.425 1.500 0.062
40425 7/16 1.830 1.000 0.615 2.480 1.575 0.078
40430 1/2 1.920 1.075 0.705 2.750 1.715 0.108
40435 5/8 2.420 1.415 0.965 3.580 2.350 0.294
40440 3/4 2.720 1.830 1.090 4.500 3.045 0.552
40445 7/8 3.520 1.820 1.270 4.460 3.200 0.740
Edward W. Daniel Diamond-D Products Logo

Heavy Wire Rope Thimbles

Formed Carbon Steel

Heavy Wire Rope Thimbles
Drawing of Heavy Wire Rope Thimbles

Specifications

  • Process:    Formed
  • Material:    Carbon Steel
  • Finish:       Galvanized
  • Origin:       Import
  • Specifications:  Federal Specification FF-T-276B for Type III Thimbles.  Meets ASTM Specification A153 for maximum corrosion protection.
Part Number Rope Size B C F L W Weight Lbs.
40300 1/4 1.700 0.890 0.465 2.220 1.500 0.060
40310 3/8 2.125 1.180 0.700 2.810 2.140 0.220
40325 9/16 2.750 1.500 0.944 3.540 2.640 0.428
Edward W. Daniel Diamond-D Products Logo